Abstract
In order to reduce the share of the motive power required to drive the robot’s links, with the aim of increasing its payload-to-weight ratio, this article studies the best way to relocate the actuators (inertial load) but not complicate the joint kinematics. For this, several Parallel Kinematic Mechanisms (PKMs) were considered, namely a 4-UU mechanism, a spherical 5-bar mechanism and a spherical 6-bar mechanism, with gimbal-like rotations. Computer-Aided Design (CAD) modelling and simulations exploring the workspaces for each of these mechanisms was performed. The complete workspace and isotropy analyses comparing these mechanisms to a gimbal system are presented. The general observations suggest that these mechanisms posses a non-uniform workspace with a “warping” behaviour. However, the spherical six bar mechanism proves to be the best solution so far with isotropy nearly \(\ge \)0.9 throughout its workspace.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
Notes
- 1.
One exception is the hydraulically actuated Atlas robot by Boston Dynamics for which, however, no data has been publicly disclosed. Given the lack of information on this specific topic, in this work, we will focus on electrically actuated robots, although similar considerations hold for other actuation technologies.
References
Hollerbach, J.M., Hunter, I.W., Ballantyne, J.: A comparative analysis of actuator technologies for robotics, pp. 299–342. MIT Press, Cambridge (1992)
Hirzinger, G., Sporer, N., Albu-Schaffer, A., Hahnle, M., Krenn, R., Pascucci, A., Schedl, M.: DLR’s torque-controlled light weight robot III-are we reaching the technological limits now? In: Proceedings of the IEEE International Conference on Robotics and Automation (ICRA), vol. 2, pp. 1710–1716 (2002). https://doi.org/10.1109/ROBOT.2002.1014788
Baccelliere, L., Kashiri, N., Muratore, L., Laurenzi, A., Kamedula, M., Margan, A., Cordasco, S., Malzahn, J., Tsagarakis, N.G.: Development of a human size and strength compliant bi-manual platform for realistic heavy manipulation tasks. In: 2017 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), pp. 5594–5601 (2017). https://doi.org/10.1109/IROS.2017.8206447
Kim, H.S., Song, J.B.: Low-cost robot arm with 3-DOF counterbalance mechanism. In: 2013 IEEE International Conference on Robotics and Automation, pp. 4183–4188 (2013). https://doi.org/10.1109/ICRA.2013.6631168
Lacasse, M.A., Lachance, G., Boisclair, J., Ouellet, J., Gosselin, C.: On the design of a statically balanced serial robot using remote counterweights. In: 2013 IEEE International Conference on Robotics and Automation, pp 4189–4194 (2013).https://doi.org/10.1109/ICRA.2013.6631169
Townsend, W.T., Salisbury, J.K.: Mechanical design for whole-arm manipulation. In: Dario, P., Sandini, G., Aebischer, P. (eds.) Robots and biological systems: towards a new bionics?. Springer, Berlin, pp. 153–164 (1993)
Kim, Y.J.: Anthropomorphic low-inertia high-stiffness manipulator for high-speed safe interaction. IEEE Trans. Robot. 33(6), 1358–1374 (2017). https://doi.org/10.1109/TRO.2017.2732354
Ueda, K., Yamada, H., Ishida, H., Hirose, S.: Design of large motion range and heavy duty 2-DOF spherical parallel wrist mechanism. J Robot. Mechatron. 25(2), 294–305 (2013). https://doi.org/10.20965/jrm.2013.p0294
Kim, J.O., Khosla, K.: Dexterity measures for design and control of manipulators. In: IEEE/RSJ International Workshop on Intelligent Robots and Systems 1991, Intelligence for Mechanical Systems, Proceedings IROS 1991, vol 2, pp 758–763 (1991). https://doi.org/10.1109/IROS.1991.174572
Shah, D., Metta, G., Parmiggiani, A.: Workspace analysis and the effect of geometric parameters for parallel mechanisms of the N-UU class. In: ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers (2018)
Fiorio, L., Scalzo, A., Natale, L., Metta, G., Parmiggiani, A.: A parallel kinematic mechanism for the torso of a humanoid robot: design, construction and validation. In: 2017 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), pp. 681–688. IEEE (2017). https://doi.org/10.1109/IROS.2017.8202225
Sofka, J., Skormin, V., Nikulin, V., Nicholson, D.: Omni-Wrist III- a new generation of pointing devices. Part I: laser beam steering devices- mathematical modeling. IEEE Trans. Aerosp. Electron. Syst. 42(2), 718–725 (2006). https://doi.org/10.1109/TAES.2006.1642584
Degirmenci, A., Hammond, F.L., Gafford, J.B., Walsh, C.J., Wood, R.J., Howe, R.D.: Design and control of a parallel linkage wrist for robotic microsurgery. In: 2015 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), pp. 222–228. IEEE (2015). https://doi.org/10.1109/IROS.2015.7353378
van der Walt, S., Colbert, S.C., Varoquaux, G.: The NumPy array: a structure for efficient numerical computation. Comput. Sci. Eng. 13(2), 22–30 (2011). https://doi.org/10.1109/MCSE.2011.37
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Shah, D., Metta, G., Parmiggiani, A. (2019). Comparison of Workspace Analysis for Different Spherical Parallel Mechanisms. In: Gasparetto, A., Ceccarelli, M. (eds) Mechanism Design for Robotics. MEDER 2018. Mechanisms and Machine Science, vol 66. Springer, Cham. https://doi.org/10.1007/978-3-030-00365-4_23
Download citation
DOI: https://doi.org/10.1007/978-3-030-00365-4_23
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-00364-7
Online ISBN: 978-3-030-00365-4
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)