Abstract
Process capability analysis are widely used in industry to achieve and maintain a high-quality level of manufactured items. Various indices have been proposed, but the most widely used are Cp, Cpk, Cpm and Cpmk. This paper gives the calculation method of the process capability index, discusses the process capability analysis and evaluation method, and analyzes in detail the process countermeasures of the process capability index is too large or too small. Through examples, the normality test method and controlled state test method for sample data are given. That is, the Q–Q probability plot and the Anderson–Daling test method are used to determine whether the sample sequence is normal distribution. The Xbar-R control chart is used to determine whether the sample sequence is in a process-controlled state. Using Minitab software, control charts and process capability diagrams were plotted, and process capability indices Cp and Cpk are calculated and analyzed. Finally, according to the quality data of customer feedback, the process capability level and state of the processing process are determined, so that the process capability can meet the customer’s requirements.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Chen, K.S., Wang, K.J., Chang, T.C.: A novel approach to deriving the lower confidence limit of indices Cpu, Cpl, and Cpk in assessing process capability. Int. J. Prod. Res. 55(17), 1–19 (2017)
Balamurali, S., Usha, M.: Determination of an efficient variables sampling system based on the Taguchi process capability index. J. Oper. Res. Soc. 2, 1–13 (2018)
Koppel, S., Chang, S.I.: a process capability analysis method using adjusted modified sample entropy. Proc. Manuf. 5, 122–131 (2016)
De-Felipe, D., Benedito, E.: Monitoring high complex production processes using process capability indices. Int. J. Adv. Manuf. Technol. 93(1–4), 1257–1267 (2017)
Pan, J.N., Li, C.I.: New capability indices for measuring the performance of a multidimensional machining process. Expert Syst. Appl. 41(5), 2409–2414 (2014)
Juran, J.M.: Juran’s Quality Control Handbook, pp. 11–13. McGraw-Hill, New York (1974)
Hsiang, T.C., Taguchi, G.: Tutorial on quality control and surface, the Taguchi methods. Joint Meetings of the American Statistical Association, Las Vegas, Nevada (1985)
Kane, V.E.: Process capability indices. J. Qual. Technol. 18(1), 41–52 (1986)
Pearn, W.L., Kotz, S., Johnson, N.L., et al.: Distributional and inferential properties of PCIs. J. Qual. Technol. 24(4), 216–223 (1992)
Wu, C.W., Pearn, W.L.: Bayesian approach for measuring EEPROM process capability based on the one-sided indices CPU, and CPL. Int. J. Adv. Manuf. Technol. 31(1–2), 135–144 (2006)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Yang, Y. (2019). Application Research of Process Capability Analysis in Manufacturing Quality Control. In: Deng, K., Yu, Z., Patnaik, S., Wang, J. (eds) Recent Developments in Mechatronics and Intelligent Robotics. ICMIR 2018. Advances in Intelligent Systems and Computing, vol 856. Springer, Cham. https://doi.org/10.1007/978-3-030-00214-5_53
Download citation
DOI: https://doi.org/10.1007/978-3-030-00214-5_53
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-00213-8
Online ISBN: 978-3-030-00214-5
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)