Abstract
This chapter covers two major classes of polymer foams, the conventional foams formed by foaming agents and syntactic foams. The first part presents the basics of polymer foaming through the use of blowing agents including a brief introduction on blowing agents and the common foaming methods used by both laboratories and industries. Current technologies used for specialty foam fabrication are included in the discussion. The multiple roles played by nanoparticles during foam formation and the effects on the foam properties are addressed in detail for nanocomposite foams. The various factors affecting the formation of microcellular foams and the properties of microcellular foams are then discussed. Two detailed examples for high-performance polymer foams are highlighted in the article. An exceptional section is devoted to syntactic foams, covering both the processing and the mechanical behaviors. It starts with general preparation of syntactic foam in a laboratory-based environment. The discussion highlights the typical mechanical behavior as well as the change in mechanical behavior observed when the content of microspheres is changed. Details on how the content of microspheres affects the mechanical and fracture properties of syntactic foams are presented. Besides looking at various content of microspheres, the existence of various toughening mechanisms in syntactic foams and the kind of toughening strategies can be used to improve the toughness of syntactic foams are also included in the section. Finally, some of the issues concerning polymeric foams and the latest developments in the field including future trends are addressed.
Similar content being viewed by others
References
Bardella L, Genna F (2001) On the elastic behavior of syntactic foams. Int J Solid Struct 38:7235–7260
Bledzki AK, Rohleder M, Kirschling H, Chate A (2010) Correlation between morphology and notched impact strength of microcellular foamed polycarbonate. J Cell Plast 46:415–440
Bunn P, Mottram JT (1993) Manufacture and compression properties of syntactic foams. Composites 24:565–571
Colton JS, Suh NP (1987a) Nucleation of microcellular thermoplastic foam with additives: part I: theoretical considerations. Polym Eng Sci 27:485–492
Colton JS, Suh NP (1987b) Nucleation of microcellular thermoplastic foam with additives: part II: experimental results and discussion. Polym Eng Sci 27:493–499
Dickinson E, Ettelaie R, Kostakis T, Murray BS (2004) Factors controlling the formation and stability of air bubbles stabilized by partially hydrophobic silica nanoparticles. Langmuir 20:8517–8525
Dolomanova V, Rauhe JCM, Jensen LR, Pyrz R, Timmons AB (2011) Mechanical properties and morphology of nano-reinforced rigid PU foam. J Cell Plast 47:81–93
El-Hadek MA, Tippur HV (2002) Simulation of porosity by microballoon dispersion in epoxy and urethane: mechanical measurements and models. J Mater Sci 37:1649–1660
Evans AG (1972) Strength of brittle materials containing second phase dispersions. Philos Mag 26:1327–1344
Fine T, Sautereau H, Sauvant-Moynot V (2003) Innovative processing and mechanical properties of high temperature syntactic foams based on a thermoplastic/thermoset matrix. J Mater Sci 38:2709–2716
Fletcher NH (1958) Size effect in heterogeneous nucleation. J Chem Phys 29:572–576
Gibson LJ, Ashby MF (1999) Cellular solids, structure and properties, 2nd edn. Cambridge University Press, Cambridge, UK
Gonzenbach UT, Studart AR, Tervoort E, Gauckler LJ (2006) Ultrastable particle-stabilized foams. Angew Chem Int Ed 45:3526–3530
Gupta N, Kishore WE, Sankaran S (2001) Studies on compressive failure features in syntactic foam material. J Mater Sci 36:4485–4491
Hunter TN, Pugh RJ, Franks GV, Jameson GJ (2008) The role of particles in stabilising foams and emulsions. Adv Colloid Interface Sci 137:57–81
Juntunen RP, Kumar V, Weller JE (2000) Impact strength of high density microcellular poly(vinyl chloride) foams. J Vinyl Addit Technol 6:93–99
Kawaguchi T, Pearson RA (2003) The effect of particle-matrix adhesion on the mechanical behavior of glass filled epoxies. Part 2. A study on fracture toughness. Polymer 44:4239–4247
Keller TM (1994) Synthesis and polymerization of multiple aromatic ether phthalonitriles. Chem Mater 6:302–305
Kim HS, Plubrai P (2004) Manufacturing and failure mechanisms of syntactic foam under compression. Compos Part A Appl Sci Manuf 35:1009–1015
Klempner D, Frisch K (eds) (1991) Handbook of polymeric foams and foam technology. Hanser, Munich
Kumar V, VanderWel M, Weller J, Seeler KA (1994) Experimental characterization of the tensile behavior of microcellular polycarbonate foams. J Eng Mater Technol 116:439–445
Lange FF (1970) The interaction of a crack front with a second-phase dispersion. Philos Mag 22:983–992
Laskoski M, Dominguez DD, Keller TM (2005) Synthesis and properties of a bisphenol a based phthalonitrile resin. J Polym Sci Part A Polym Chem 43:4136–4143
Laskoski M, Dominguez DD, Keller TM (2007) Synthesis and properties of aromatic ether phosphine oxide containing oligomeric phthalonitrile resins with improved oxidative stability. Polymer 48:6234–6240
Lee J, Yee AF (2000) Fracture of glass bead/epoxy composites: on micro-mechanical deformations. Polymer 41:8363–8373
Lee J, Yee AF (2001) Inorganic particle toughening I: micro-mechanical deformations in the fracture of glass bead filled epoxies. Polymer 42:577–588
Lee LJ, Zeng C, Cao X, Han X, Shen J, Xu G (2005) Polymer nanocomposite foams. Compos Sci Technol 65:2344–2363
Lee KS, Jeon B, Cha SW (2011) Development of a multilayered optical diffusion sheet using microcellular foaming technology. Polym Plast Technol Eng 50:102–111
Leung SN, Wong A, Park CB, Zong JH (2008) Ideal surface geometries of nucleating agents to enhance cell nucleation in polymeric foaming processes. J Appl Polym Sci 108:3997–4003
Liao Q, Tsui A, Billington S, Frank CW (2012) Extruded foams from microbial poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and its blends with cellulose acetate butyrate. Polym Eng Sci 52:1495–1508
Luxmoore AR, Owen DRJ (1980) The mechanics of syntactic foams. Applied Science Publishers. Barking, Essex IG11 8JU, England
Martini-Vvedensky JE, Suh NP, Waldman FA (1984) Microcellular closed cell foams and their method of manufacture. Massachusetts Institute of Technology, Cambridge, MA
McClurg RB (2004) Design criteria for ideal foam nucleating agents. Chem Eng Sci 59:5779–5786
McCusker LB, Liebau F, Engelhardt G (2001) Nomenclature of structural and compositional characteristics of ordered microporous and mesoporous materials with inorganic hosts: (IUPAC recommendations 2001). Pure Appl Chem 73:381–394
Nelson GL, Wilkie CA (2001) Fire and polymers: materials and solutions for hazard prevention. American Chemical Society, Washington, DC
Pawlak A, Galeski A (2002) Determination of stresses around beads in stressed epoxy resin by photoelasticity. J Appl Polym Sci 86:1436–1444
Rizzi E, Papa E, Corigliano A (2000) Mechanical behavior of a syntactic foam: experiments and modeling. Int J Solid Struct 37:5773–5794
Rothon RN (1995) Particulate-filled polymer composites. Longman, New York
Shutov, FA (1991) Syntactic Polymeric Foams, Handbook of Polymeric Foams and Foam Technology, pp. 355–374, Hanser Publishers, New York
Spitael P, Macosko CW, McClurg RB (2004) Block copolymer micelles for nucleation of microcellular thermoplastic foams. Macromolecules 37:6874–6882
Tsivintzelis I, Angelopoulou AG, Panayiotou C (2007) Foaming of polymers with supercritical CO2: an experimental and theoretical study. Polymer 48:5928–5939
Verdejo R, Saiz-Arroyo C, Carretero-Gonzalez J, Barroso-Bujans F, Rodriguez-Perez MA, Lopez-Manchado MA (2008) Physical properties of silicone foams filled with carbon nanotubes and functionalized graphene sheets. Eur Polym J 44:2790–2797
Wouterson EM, Boey FYC, Hu X, Wong S-C (2004) Fracture and impact toughness of syntactic foam. J Cell Plast 40:145–154
Wouterson EM, Boey FYC, Hu X, Wong SC (2005) Specific properties and fracture toughness of syntactic foam: effect of foam microstructures. Compos Sci Technol 65:1840–1850
Wouterson EM, Boey FYC, Hu X, Wong SC (2007a) Effect of fiber reinforcement on the tensile, fracture and thermal properties of syntactic foam. Polymer 48:3183–3191
Wouterson EM, Boey FYC, Wong SC, Chen L, Hu X (2007b) Nano-toughening versus micro-toughening of polymer syntactic foams. Compos Sci Technol 67:2924–2933
Zettlemoyer AC (ed) (1969) Nucleation. Marcel-Dekker, New York
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer-Verlag London
About this entry
Cite this entry
Hu, X., Wouterson, E.M., Liu, M. (2013). Polymer Foam Technology. In: Nee, A. (eds) Handbook of Manufacturing Engineering and Technology. Springer, London. https://doi.org/10.1007/978-1-4471-4976-7_23-5
Download citation
DOI: https://doi.org/10.1007/978-1-4471-4976-7_23-5
Received:
Accepted:
Published:
Publisher Name: Springer, London
Online ISBN: 978-1-4471-4976-7
eBook Packages: Springer Reference EngineeringReference Module Computer Science and Engineering